GEOCLEAN® 500S

Pretreatment

Overview

GEOCLEAN® 500S is a synthetic coolant developed for the machining and grinding of all ferrous metals. This synthetic combines the features of semi-synthetics and soluble oils. GEOCLEAN® 500S provides superior cooling, cleanliness and long solution life of synthetics, while contributing the heavy duty capabilities of conventional soluble oils.

10.5

pH of concentrate

8.75

PPG at 60°F

9.5

pH of 20:1 solution
Characteristics

• Superior cooling, cleanliness and long solution life of synthetics

• Heavy duty capabilities of conventional soluble oils

• Efficient machining, grinding, tapping and sawing of cast iron, carbon steels and stainless steels

• Provides necessary cooling, wetting, detergency and corrosion inhibition for centerless, cylindrical and internal/external grinding

• Clear amber appearance

• PPG at 60°F: 8.75

• pH of 20:1 solution: ~9.5

• No sulfur, chlorine, nitrites

• Specific Gravity: 0.87

• Viscosity cST at 40°C: 68

• Flash Point: 390°F

• No sulfur, phosphorous, chlorine

• No heavy metals, phenols, PCBs

Equipment

Processing tanks, piping, pumps and heat transfer surfaces constructed of mild steel will provide satisfactory service life.

To Charge Tank

GEOCLEAN® 500S is shipped as a concentrate and must be diluted with water to a 20:1 ratio. Mix thoroughly. Solution is ready for use.

Storage, safety and handling

 

Please read Safety Data Sheet (SDS) before use. Avoid contact with eyes and prolonged contact with skin. Wash thoroughly after handling. 

 

Check your local, state and federal regulations on chemical storage to insure compliance. Users should employ common sense storage precautions to protect their workers, first responders, facilities, sewers, and the environment from accidental spills and leaks of hazardous chemical products. Refer to the Safety Data Sheet for specific storage precautions not contained herein.

pds/geoclean-500s/en/2024-03-28/