SPRAY FOR REPAIR TOUCH UP

Post-treatment

Overview

Aerosol zinc flake coating used in many industries (Wind Power, Railway, Automotive, etc…) for touch-up or repairs on slightly corroded areas which can be spotted during maintenance operation. Reparation of rusted areas can be done without disassembly the concerned component and doesn't need any curing.

Available on order directly to NOF Metal Coatings (No GEOMET® license required).

Metallic silver color

Solvent-based formulation

6×400 mL

Spray can packaging

5 years

Without red rust*

10 min

Air drying

* Results may vary depending on surface preparation, dry film thickness, compliance with application instructions and application area.

MARKETS

Parts

Industries

Automotive

Building

Agricultural equipment

Construction equipment

Metallic construction

Oil & gas

Railway

Solar power

Telecommunication equipment

Truck

Two-wheelers

Wind power

Instructions

• Remove rust before application with a metallic brush or equivalent.

• Ensure that the surface to coat is perfectly clean and dry.

• Shake the spray can until you heard the beads (minimum 30 sec).

• Spray in smooth strokes, at a distance of approx. 20-30 cm, all along the area to repair.

• Allow to dry for minimum 10 minutes at room temperature (15-25°C).

Storage and safety

Protect the can from sunlight. Do not expose to temperatures exceeding 50°C / 122°F.

Spray for repair touch up is chrome free and has a max VOC of 840g/L according to 2004/42/IIB(e).

Compliant with

REACh - Registration, Evaluation, Authorization and restriction of Chemicals

2011/65/EU and (EU) 2015/863 - Directive of the European Parliament on the restriction of the use of certain hazardous substances in electrical and electronic equipment

pds/spray-for-repair-touch-up/en/2024-05-13/